Flow line hookup

flow line hookup

How do I connect a flow line to a shape?

A flow line connector will attach to a shape. When the shape is moved, the connector will stay attached to the shape whereas a standard line or arrow will not. To tell whether a flow line is connected to a shape, click on it and you should see a red dot at the connection points, as shown in the image below.

What is the difference between connector and flow line?

Work with Flow Lines (Connectors) Terminology. In flowcharting, an arrow from one process step to the next is often called a Connector, a Flow Line, or simply an Arrow. As the names indicate, they show the direction of process flow. This help file uses the terms Connector and Flow Line interchangeably.

How do I connect a tap to my water line?

Just add an adaptor to your water line, screw in a tap, and connect it. The water can come from a sink, kitchen on the other side of a wall, or anything similar.

What is a flowline in oil and gas?

In the oil and gas industry, flowlines are pipe lines that connect a single wellhead to a manifold or process equipment. In a larger well field, multiple flowlines may connect individual wells to a manifold. Then a gathering line may transfer the flow from the manifold to a pre-process stage or to a transportation facility or vessel.

How do I re-connect a flow line to a shape?

If one or both of the flow line end points has a green dot when selected (shown below), then it is not connected to the shape. If Symbol 2 were moved, the flow line will not be moved with it. To re-connect a flow line like this, click on the green dot with your mouse and drag it to a connection point on the shape.

How do I add a connector line to a shape?

To add a connector line between two shapes, left-click on the first connection point and then drag the mouse to the second connection point and release, as shown in the two images below. There are three basic types of connectors - straight, elbow, and curved.

How do I bring the lines of a shape together?

This way, a shape brings its lines along with it if its moved around the board. Click in the toolbar. Select between an elbow connector or straight line shape. You can also use the keyboard shortcuts X or ⇧ Shift L to create an elbow connector, and L for a straight line.

What is the difference between connector and flow line?

Work with Flow Lines (Connectors) Terminology. In flowcharting, an arrow from one process step to the next is often called a Connector, a Flow Line, or simply an Arrow. As the names indicate, they show the direction of process flow. This help file uses the terms Connector and Flow Line interchangeably.

What Is A Wet Tap Connection For A Water Main Service Line? A wet tap connection refers to the connection made into a New York City water main (or any public water main) for a water service line installation. Usually such a connection is for one individual property.

Can you connect a tap to the outside of a house?

What are flowlines in oil and gas industry?

In the oil and gas industry, Flowlines transport fluids between a wellhead and a gathering station like RMS or MSV or treatment facility and vice versa. In a larger well field, multiple flowlines connect individual wells to a manifold.

What is the difference between flowlines and pipelines?

Flowlines are pipes that carry oil or gas products from the producing wells to the oil or gas gathering stations or pumping stations. Pipelines are the pipes that carry oil or gas from the Gathering stations to the processing stations or to the market. Flowline = Within oil field area (often laid above ground, sizes vary up to 16″.

What is the purpose of a flowline?

In an actively producing oilfield, flowlines connect to a single wellhead. Their purpose is to move the raw product from the wellhead to the gathering lines. They carry a mixture of oil, gas, water and sand and are normally no more than 12” diameter in size.

What is a well field flowline?

In a larger well field, multiple flowlines connect individual wells to a manifold. The flow from the manifold is then transferred by a gathering line to a pre-process stage or to a transportation facility or vessel. Flowlines can run over land or subsea well-field.

Related posts: