Thermostat hookup wiring

thermostat hookup wiring

How do you hook up a thermostat wire by wire?

Installing A New Thermostat (Reconnecting Wire By Wire) 1 Red wire: Power (24V input in most cases). 2 Green wire: Fan. 3 White wire: Heating. 4 Blue wire: Cooling. 5 Rh: Heating power. 6 Rc: Cooling power. To reconnect the wire, simply put the wire on the right terminal and tighten down the set screw. ...

What are the two wires on a thermostat?

The most basic thermostat has 2 wires; usually a red and a white wire. Two wire thermostat wiring is used for furnaces only and usually doesn’t need a “C” or “Common” wire. That’s why we only need two wires: Red wire for power (24h). White wire for heating.

How to disconnect a thermostat wire?

Take the piece of paper and pen or pencil and write down where each thermostat wire is landed on the terminal board. Finally, take the labels and label each wire for the terminal where the thermostat wire was landed, and note the color to the terminal for the wires you will soon disconnect.

Where does the Y wire go on a thermostat?

This wire will go to the G terminal on your new thermostat. For the Y, Y1, and Y2 wires, Y or Y1 will go to the Y terminal, and Y2 will go to the Y2 terminal. The O/B wire can have many configurations.

How to connect your thermostat wires to the AC unit?

How To Connect Your Thermostat Wires to the AC Unit 1 Disconnect the thermostat. 2 Label your wires. 3 Familiarize yourself with the color coding for the wires. 4 Check the wires. 5 Connect the wires from the control board to the outside unit. Connecting your thermostat to your air conditioner is more... More ...

How do you connect a wall mount thermostat to a wall?

Connect the wires from the wall to the thermostat. Refer to your labels or the notes you made to connect them correctly. Twist the wires to the connectors on the back of the thermostat or follow the directions provided with the manufacturers instructions.

What are the different types of thermostat wirings?

We will cover the most common thermostat wirings for 2 wire, 3 wire, 4 wire, and 5 wire thermostats. At every stage, we will point out what 2 wire or 5 wire thermostats are used to wire, for example, to get a bigger picture of where those color wires go and how they enable the functions of air conditioners and furnaces.

What are the best tips for wiring a thermostat?

Use these tips to wire a thermostat. Read the manufacturers instructions. Before wiring a new thermostat into your wall, review all tips, suggestions and pictures provided in the instructions. Take heed to any special directions given for your particular model. Turn the electricity off to the thermostat.

Where does the yellow wire go on a thermostat?

The yellow wire is the cooling wire and it goes into the Y terminal of the thermostat. The yellow wire is used for cooling. It controls your air conditioner and this wire goes all the way back to your HVAC system connects to a terminal on your HVAC system board.

What color is the y2 on a thermostat?

Most systems have one compressor, but in case there are two, the Y2 terminal is connected via a light blue wire to the second compressor. So to recap, yellow wire for cooling and an additional light blue wire if there are two compressors. The white wire behind your thermostat controls the heating section of your HVAC system.

What type of wiring does a thermostat use?

For typical wiring examples, and for clarification of what types of systems your thermostat works with, please consult your owners/install guide. * The thermostat uses 1 wire to control each of your HVAC system’s primary functions, such as heating, cooling, fan, etc.

Where does the thermostat wire connect to the transformer?

For all other systems, the wire connects to a transformer at the other end. There will probably be two red wires in modern thermostats, marked by Rh (heating) and Rc (cooling).

Related posts: