How do you hook up subs in a car

how do you hook up subs in a car

How to hook up a subwoofer to a car?

Take your remote wire that came in your amp kit and splice/solder it onto that blue and white-striped wire and run it through the dash and then along the door jam. While you have the CD player removed, plug the RCA white and red plugs into the back of the deck where it says Subwoofer Output..

How do you connect an amp to a subwoofer enclosure?

The amp should be set up next to or on top of the subwoofer enclosure. If it is separate from the subwoofers, it may have its own colored wires to connect to the ones on the stereo. Use more crimp connectors or solder the wires together as needed. Otherwise, use the existing cables to connect it to your sound system.

Do you need an amp for a subwoofer in a car?

So, now you came to know that using an additional amplifier with the subwoofer are depends on your choice and preference. You can effortlessly connect a subwoofer in a car without an amp and use it for a long time.

How do I connect a subwoofer to a 5 Channel Receiver?

5.1 channel audio (e.g. media found on DVD discs or from cable television) has a dedicated channel output (the .1 part) with bass-only content that is best reproduced by a subwoofer. Setting this up merely requires connecting the LFE (or subwoofer output) jack on the receiver/amplifier to the Line In or LFE In jack on the subwoofer.

How to install a powered subwoofer in a car?

The powered subwoofer connects to the stereo in the same way as the standard amplifier. This process is straightforward, and most of the active woofers come equipped with all the necessary wires, so let’s start: Run power cable from the car battery to where the subwoofer will be installed.

How to connect a subwoofer to an amplifier?

There are a few ways that one can expect to connect a subwoofer to an amplifier, receiver, or processor (also known as a home theater receiver). The most common method is done by connecting the subwoofer to the SUB OUT or LFE output of a receiver/amplifier. But you might also come across a subwoofer that uses stereo RCA or speaker wire connections.

What is the best subwoofer for a car stereo?

The most popular subwoofers which you can connect directly with the stereo are active subwoofers. My favorite is the thin but high-performing under-seat Rockford Fosgate PS-8 Punch, which you can install in nearly every car thanks to its height of barely 3.3″.

How do I connect my speakers to my car?

At each pair of speaker wires or near the speaker wire connector, strip off about 1/2″ of insulation and tap off it. To do so, either wrap wire or cut the factory wire and connect to it using crimp connectors while attaching a small gauge wire when doing so. Crimp connectors (see the tool list above) are reliable and make good electrical contact.

How to connect a subwoofer to an amplifier?

There are a few ways that one can expect to connect a subwoofer to an amplifier, receiver, or processor (also known as a home theater receiver). The most common method is done by connecting the subwoofer to the SUB OUT or LFE output of a receiver/amplifier. But you might also come across a subwoofer that uses stereo RCA or speaker wire connections.

How do I connect a subwoofer to a receiver with RCA?

Right: An RCA Y adapter that can be used with a line level converter to connect to a subwoofer with a single RCA input jack. For subwoofers with only 1 or more RCA input jacks (no speaker level inputs), a simple way to connect them to a receiver with no subwoofer output is by using a line level converter.

What is the subwoofer input on a receiver?

The subwoofer input jack usually connects to a single mono (monaural, meaning both stereo channels are combined into one) output jack on the receiver. Example of the mono RCA subwoofer output jack found on many home receivers. These connect with a single male to male RCA cable to a powered subwoofer.

How do I connect my LFE subwoofer to my Receiver?

Connect Using Stereo RCA or Speaker Level Outputs. Sometimes youll find that a receiver or amplifier does not have the LFE subwoofer output. Or it might be that the subwoofer doesnt have the LFE input. Instead, the subwoofer might have right and left (R and L) stereo RCA connectors.

Related posts: